1" Stair Tread - Full Bullnose

Classic and simple, the natural wood grain shines through the 8070 Stair Treads. Choose from over 20 wood species, available in a variety of stains and finishes. Bullnose trim offers a smooth transition between steps and an elegant finish on returned edges. Traditional treads to preserve beauty and strength in your home.

Key Features

• Bullnose Trim

• Stain-grade

• Multiple Sizing Options

Note, wood products may have varying amounts of staves due to the varying thicknesses of lumber that comes in each bunk and the width of the product.

Returned Edges

Any side of the 8070 Stair Treads that will not touch a wall is fitted with smooth bullnose trim. Returned Edges cover end grain, while also adding decorative flair. There are three configurations of returned edges available to cover the exposed edges of 8070 Stair Treads: Left, Right, and Double. NOTE: If both sides of the stair treads fit against a wall, you do not need returned edges.

To determine if a Left or Right Returned edge is required, stand at the bottom of the stairway and look up. If the right side is exposed, then you need a Right Returned Edge. If the left side is exposed, then you need a Left Returned Edge.

Double Return stair treads are needed when both edges of the tread are exposed. This style of tread requires a special measurement called the “throat cut”, which you will need to provide when you place your order. To find the throat cut of your Double Return tread, measure the length between the inside of the Left and Right Returned Edges.

With the exception of Double Returns, all Left, Right, and No Return Treads are sent to you with up to an extra 1” of material on the end with no return. This additional allowance may be trimmed on-site to match the exact curve of your unique wall, ensuring a snug fit.