Product Description
The Steel Insert Sleeve is used to cover the hole wherever cable exits a metal post on a level run, creating a clean look. These sleeves have been designed with a small lip that helps the part lock into place once properly installed. With the beauty of 316 stainless steel, the Steel Insert Sleeve brings a look of elegance to any Viewrail cable railing system. The Steel Insert Sleeve can be found in the Level Tension Kit.
<h2>Product Q&A</h2>
You must be logged in to post a comment.
Product VR331, what is the OD & ID dimension. How thick is the portion that is visible on the post?
Hi Dave,
The inner dimension is 3/16.”
The outer dimension is just over 5/8.”
The thickness that sticks out of the post is .150″.
Please let us know if there’s anything else we can help you with!
how would you suggest making this insert water tight so no rainwater can enter the (hollow) post?
Steven, thanks for reaching out to us regarding the Steel Insert Sleeve.
The Insert Sleeve is a very tight fit so water is not likely to get inside regardless, but if you want some additional protection you could apply a bead of silicon around the interior of the sleeve immediately before you press it into place. You might get some squeeze-out that you’ll want to wipe down.
If you have any additional questions, don’t hesitate to call one of our excellent support specialists at (866) 226 6536.
Best,
Your StairSupplies Support Team
what is the max size cable will pass through this sleeve?
Jason, thanks for contacting us.
The inner dimension is 3/16.”
The outer dimension is just over 5/8.”
The thickness that sticks out of the post is .150″.
If there’s anything else we can help you with, let us know or give us a call at (866) 226 6536.
Best,
StairSupplies Customer Support