Product Description
The Adhesive Sleeve is used to cover the hole wherever cable exits a metal post on an angled run, or whenever an Inside Post Mount or Angle Tension Kit is used. These sleeves have been outfitted with an all-weather adhesive backing that locks the part into place once properly installed. Choose between a Standard or Angle Adhesive sleeve to best match your setting. With the beauty of 316 stainless steel, the Adhesive Sleeve brings a look of elegance to any cable railing system.
Standard Adhesive Sleeves are used for level applications.
Angle Adhesive Sleeves are used for angled applications.
<h2>Product Q&A</h2>
You must be logged in to post a comment.
What is the OD and ID dimension of the part number VR339?
Hi Caleb. The outer dimension of the VR339 is 5/8”. The inside dimension is 1/4”. Feel free to let us know if you have any further questions!
what is the QTY in a single pack?
Hi Eve,
When you order a 1-pack of VR339 Adhesive Sleeves, you’ll receive a single adhesive-backed sleeve. We also offer the 20-,22-, & 24-packs of sleeves that pair perfectly with the 3 standard heights of our posts. For a 36″ post, you’ll want the 20-pack. For a 39″ post, go with the 22-pack. And for our 42″ posts, be sure to get the 24-pack. If you have additional questions, please give our team a call at 1 (866) 226-6536.
Best,
The StairSupplies Support Team
Could you let me know what the thickness is on these? i plan on putting these on a custom post and want them flush.
Thanks for the question jhardwick.
These are 1/8″ thick.
Best,
StairSupplies Customer Support
Are these adhesive sleeves used on the interior posts on stair railing?
Hi Carl,
Yes, these sleeves are used on post cable exit points of any angled run of cable railing, also whenever our KeyMount is used. This individual component is found in our Angle Tension Kit and KeyMount Kit. If you have any other questions, feel free to reach out to us.
Thanks,
StairSupplies Customer Support