Angle Line Post, Signature Barrier Glass, Slim Side Mount

Keep glass aligned all the way up the stair with this Signature Barrier Glass line post. It sits between the end posts and holds consistent panel alignment and clip spacing along the pitch. Use one post per 4 feet of panel run; it comes pre-drilled for glass clips. A 2″ wide, 1″ thick plate sits behind the post and the post bolts through it into the fascia. There is no handrail: the post stops 3.5″ short of the glass edge, so the glass forms the guard. Choose aluminum, 304 stainless, or coastal-rated 2205 stainless in 36″, 39″, or 42″ system heights, powder coated in Textured Black, White, or Silver. Made in the USA.

Key Features

- Intermediate post for stair runs; one per 4 ft of panel

- Pre-drilled for glass clips (sold separately)

- Slim side mount: 2″ wide, 1″ thick plate behind the post

- Barrier Top: no handrail; post ends 3.5″ below the glass

- Aluminum, 304 stainless, or 2205 stainless (coastal) in 36″, 39″, 42″

- Made in the USA